<div dir="ltr">Hello,<div><br></div><div>I was wondering if anybody has experience with changing the temperature in an equilibrium run at given speed, to investigate temperature-dependent strength in association? Is it feasible/sane to record data at equilibrium at, e.g., 20C, and then to change the temperature to, e.g., 40C, and to hope to get data for equilibrium and record once more?</div>
<div><br></div><div>In my case, the association seems to weaken substantially with temperature and I observe a weaker curvature at the higher temperature. For a third step, going back to the original temperature, I programmed the run, but made two mistakes with it - firstly to not allow sufficient time for the equilibrium and, secondly, to somehow got the "stop AUC after last scan" checked :o(</div>
<div>As result, I am looking at a scan that doesn't resemble the one at lower temperature, yet it is similar to scans I saw during the equilibration between the two temperatures at step 2.</div><div><br></div><div>Has anybody tried something similar? Am I onto something believable/real, or shouldn't waste any more precious sample on a proper repeat (i.e. separate runs/samples for each temperature)?</div>
<div><br></div><div>Thanks in advance!</div><div>Frank</div></div>