<p>We had this issue for a while, always at two radial positions in every cell and always with absorbance optics.  After replacing the whole slit assembly didn't fix it, the technician discovered that the two screws that held the slit on were of slightly different lengths.  He filed one down and now the data look great!</p>

<p>Ian</p>
<p>---sent on the go....</p>
<div class="gmail_quote">On Jun 28, 2011 11:25 AM, "Peter Edward Prevelige Jr" <<a href="mailto:prevelig@uab.edu">prevelig@uab.edu</a>> wrote:<br type="attribution">> Hi All -<br>> <br>> We are observing what appear to be plateaus in the absorbance profile in both equilibrium and velocity runs. The plateaus are seen with different samples and different rotor speeds. Our current hypothesis is that the slit in front of the detector is sticking and releasing.  It appears that these are lost steps as after the slit releases the exponential is shifted along the radial distance axis. Some representative data is attached showing different speeds and cells. The superimposed scans (cell 1 35K, & cell 1 44K) are scans recorded about 10 hours apart in time.<br>
> <br>> Is it reasonable to think that the slit is sticking? How can we diagnose and fix this problem?<br>> <br>> Peter<br>> <br>> Peter E. Prevelige Jr.<br>> Professor<br>> Dept. of Microbiology, BBRB 416/6<br>
> Univ. of Alabama @ Birmingham<br>> 845 19th St. South<br>> Birmingham AL. 35294-2170<br>> Phone 205 975-5327<br>> FAX 205 975-5479<br>> <a href="mailto:prevelig@uab.edu">prevelig@uab.edu</a><mailto:<a href="mailto:prevelig@uab.edu">prevelig@uab.edu</a>><br>
> <a href="http://www.microbio.uab.edu/faculty/prevelige/prevelige-p.htm">http://www.microbio.uab.edu/faculty/prevelige/prevelige-p.htm</a><br>> <br></div>