Hi all,<div><br></div><div>We have an XL-I machine (~1.5yr old) which has given a CPU board malfunction error (code#11) several times now.  It happens after several hours and the centrifuge just shuts down while the computer still thinks it's scanning.  Beckman tells us it's a software problem on the computer and an upcoming software release should fix it.  They suggest that in the meantime I do a short absorbance scan (r 6.2-6.7) of the counterbalance to allow the computer's data saving to catch up with the AUC scans of other cells.</div>
<div><br></div><div>I don't know if it's related, but a couple of times I also noticed that the centrifuge and the computer were out of sync as the centrifuge accelerated to speed.  I started the centrifuge from the computer and began calibrating the laser for IF.  That part went as normal, but when I looked at the XL monitor on the computer, the speed readings were delayed by ~1-2min and the computer would be waiting for speed and not letting me start scanning until it had caught up.</div>
<div><br></div><div>Has anyone else experienced this problem?</div><div><br></div><div>Thanks,</div><div>Ian</div>