[RASMB] Re: densitymeter to computer (Antje Voelkel)

[Susumu UCHIYAMA]

Dear Antje,

I have experience of connecting DMA5000 to PC via RS-232C.
But I don't remember the procedure exactly and I'm out of my lab thus
I'll send detailed procedure later.

Susumu

-- 
////////////////////////////////////////////////////////
Susumu Uchiyama, Ph. D., Assistant Professor
Department of Biotechnology,
Graduate School of Engineering, Osaka University
2-1 Yamadaoka, Suita 565-0871, Osaka, Japan
TEL: 81-6-6879-4215
FAX: 81-6-6879-7442
E-mai : suchi at bio.eng.osaka-u.ac.jp
http://www.bio.eng.osaka-u.ac.jp/cl/biocladm/E_top.html
////////////////////////////////////////////////////////


>
> Today's Topics:
>
>    1. densitymeter to computer (Antje Voelkel)
>    2. Re: densitymeter to computer (Borries Demeler)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 14 Apr 2009 15:58:02 +0200
> From: "Antje Voelkel" <Antje.Voelkel at mpikg.mpg.de>
> Subject: [RASMB] densitymeter to computer
> To: <rasmb at rasmb.bbri.org>
> Message-ID:
> 	<7FDC548C419B6740B8CB420D65586DBB0BFE4C at EXMAIL10.mpikg.local>
> Content-Type: text/plain; charset="us-ascii"
>
> Dear colleagues,
> Does anybody have experiences in connecting a DMA 5000 densitymeter to a
> computer?
> It looks like our program version does not respond.
>
> Best regards
> Antje
>
> ===============================================================
>
> Antje Voelkel
> Max-Planck-Institute of Colloids and Interfaces
> Colloid Chemistry
> Am Muehlenberg 1
> 14476 Golm
> Germany
>
> Tel:  +49 331 567 -9528/ -9531
> Fax: +49 331 567 -9502
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://rasmb.bbri.org/pipermail/rasmb/attachments/20090414/efeddd93/attachment.html
>
> ------------------------------
>
> Message: 2
> Date: Tue, 14 Apr 2009 09:10:28 -0500 (CDT)
> From: Borries Demeler <demeler at biochem.uthscsa.edu>
> Subject: Re: [RASMB] densitymeter to computer
> To: Antje.Voelkel at mpikg.mpg.de (Antje Voelkel)
> Cc: rasmb at server1.bbri.org
> Message-ID: <200904141410.n3EEASTv016429 at biochem.uthscsa.edu>
> Content-Type: text/plain; charset=us-ascii
>
>   
>> Dear colleagues,
>> Does anybody have experiences in connecting a DMA 5000 densitymeter to a
>> computer?
>> It looks like our program version does not respond.
>>
>> Best regards
>> Antje
>>     
>
> Antje,
>
> Sorry, can't help there, but UltraScan has a GUI for doing all these
> calculations inside of UltraScan, but you have to enter the temperature
> and frequencies into the GUI. I wrote this for the old DMA 60, chances 
> are the DMA 5000 reports numbers that will work in this GUI as well, but
> I am not certain.
>
> It looks like this model has several interfaces. If you hook it up over a 
> RS-232 connection, make sure the cable has the correct pin assignment, and
> the serial port settings match. A USB connection seems to be available as
> well, you may want to try a a different USB port or cable.
>
> If you have the wrong software, you may be able to find the right version on
> their website:
>
> http://www.anton-paar.com/US/en/60/253#Downloads
>
> -Borries
>
>
>
> ------------------------------
>
> _______________________________________________
> RASMB mailing list
> RASMB at rasmb.bbri.org
> http://rasmb.bbri.org/mailman/listinfo/rasmb
>
>
> End of RASMB Digest, Vol 43, Issue 6
> ************************************
>
>