[RASMB] UltraScan AccessGrid Seminar on Thu, June 5th (today)

[Borries Demeler]

Dear Colleagues,

This is an announcement for the next UltraScan seminar, which will take
place on Thursday, June 5th, '08 at from 11 am - 12 pm Central Time.

This meeting will be open for general questions and discussions.
Feel free to send me experimental analysis for analysis with any
method implemented in UltraScan. Sorry for the late notice, I was out
of the country.

PLEASE NOTE:

The UltraScan seminar is broadcast over the AccessGrid. In order to
participate you will need to have AccessGrid 3.0.2 or higher installed
on your computer. If you are not on a multicast network (most likely
you will not have this capability), you need to connect via unicast,
and you will need to use a unicast/multicast bridge to communicate
(Tools:Bridges in the Venueclient menu). You can use the following
MC-bridges to connect to our venueserver: Argonne, NCSA and the UTHSCSA
bridge. Participants are strongly encouraged to test their connections
one or two days in advance with Jeremy Mann (jeremy at biochem.uthscsa.edu)

Additional information and links to free AccessGrid software can be
found at:

http://www.accessgrid.uthscsa.edu

Instructions for installing it on Windows or Linux is available at:

http://accessgrid.uthscsa.edu/wiki/doku.php

The seminar will take place in the UltraScan room in the 3.1 venue server
of the University of Texas Health Science Center at San Antonio. The
venue address for the UTHSCSA Lobby is:

https://ag1.v19.uthscsa.edu:9000/Venues/default (AccessGrid 3.x)

There will be a 1 hour testing time - 10-11 am central time.  Please
contact Jeremy Mann at jeremy at biochem.uthscsa.edu or 210-567-2672 for
assistance. I recommend to test out your AccessGrid connection one or
two days in advance of the meeting if you have never set it up before.

Best Regards, -Borries